|
|
|
|
Internal - Waste pipes, traps etc
If sink or washing machine wastes are blocked this is normally due to the items mentioned above, and we would recommend that you initially try hot soapy water on the waste traps to clear them. If the problem persists, and you are confident enough, you could remove the trap underneath the sink (or behind the washing machine) and clean out any debris etc. After refitting the trap, pour boiling water through the waste pipe until it's running clear.
 If available, use a hand plunger to try and dislodge the blockage. If the
problem persists however, the pipe work may need to be electrically eeled
through, or dismantled and replaced by a specialist.
|
Send mail to
Webmaster with
questions or comments about this web site.
|
